The person who understands you best will always be by your side, guarding you silently and not letting you suffer the slightest grievance. A person who really loves you won't say many words of love to you, but will do many things to love you.
>It can work with three or two cylinders, and can achieve the requirements of: or: slurry mixing ratio.
>Which pneumatic double-liquid grouting pump has the best quality? Made by Dongda, Jining, Shandong!
>Pneumatic double-liquid grouting pump accessories product introduction
ZBQ/Mining pneumatic double-liquid grouting pump accessories is a new type of grouting equipment developed by integrating multi-disciplinary advanced technology. It is mainly used in mines, It is used in tunnel, hydropower, subway, building, and bridge construction projects. It is used for grouting and consolidation of broken rock formations, water plugging, and gap filling to eliminate underground hidden dangers during flood fighting and rescue operations.
>Technical features of pneumatic double-liquid grouting pump accessories
The outstanding advantages of this series of grouting pumps: advanced structure, high rated grout pressure, high efficiency, convenient mobile maintenance, high pressure and large displacement. A multifunctional pump.
, full-featured, can inject either single-component slurry or two-component slurry, can inject h slurry, or can inject cement slurry. Each cylinder works synchronously, the mixing ratio can be adjusted, and the slurry is evenly mixed. Act as emulsion pump or high-pressure water pump, hydraulic pump, etc. for other occasions.
, good safety, can be used safely in places that are flammable, explosive, and have large changes in temperature and humidity.
, the parameters can be adjusted according to the different needs of customers to meet the special requirements of different pressures, flow rates, multi-component slurry mixing ratios and different media: it can work in three cylinders or two cylinders, and can achieve: or: Slurry mixing ratio requirements.
>Technical parameters of pneumatic double-liquid grouting pump accessories
Mining pneumatic double-liquid grouting pump accessories use compressed air as the power source. Since the cylinder and grouting cylinder have a large action area ratio, they can Smaller air pressure can cause the grouting cylinder to produce higher grouting pressure. > Structural features and working principles of pneumatic double-liquid grouting pump accessories
Each cylinder is arranged upright and has good stress conditions. The reciprocating motion of the cylinder is controlled by an advanced built-in valve and is driven in both directions. It is safe and reliable, and the volume ratio is greatly increased. It has low air consumption and significant energy saving effect. Each grouting cylinder is a single-rod double-acting cylinder, which can achieve continuous grout discharge, uniform grout mixing, and small grouting pressure fluctuations.
>Pneumatic double liquid grouting pump maintenance instructions
Be sure to first remove the screws fixing the pressure gauge on the protective cover, unplug the tube behind the pressure gauge, and then remove the screws on the protective cover. , the protective cover can be removed.
, unscrew the nut that fixes the grouting tank, and then unscrew the nut that fixes the piston rod of the grouting cylinder and the piston rod driving block, and then the entire grouting cylinder can be pulled out from the grouting cylinder base. , Unscrew the screw cap on the grouting tank, first remove the large (small) grouting female joint from the large (small) grouting tank, be sure to take out the sealing gasket of the large (small) grouting inlet, and then remove the piston. The rod must be pulled out from the grouting cylinder, otherwise the piston sealing ring may be easily damaged.
Unscrew the screw cap on the large (small) grouting cylinder, pull out the piston rod, and use a special nylon rod or copper rod from the other end to push out the piston rod assembly ring (for the shaft) from the grouting cylinder (The small grouting cylinder assembly is to eject the small piston rod assembly ring (for the shaft) from the small grouting cylinder).
When replacing the sealing rings of the grouting cylinder, pay special attention to the installation direction and do not damage the sealing rings.
. Remove the four nuts from the upper cylinder cover to open the cylinder, the pneumatic valve assembly under the cylinder, and the upper and lower cover assemblies of the cylinder.
. Remove the screws on the upper cover of the cylinder to open the components of the pneumatic valve.
>Pneumatic double-liquid grouting pump equipment maintenance
Good maintenance is the prerequisite to ensure the normal operation of the equipment and extend its service life. Regularly add lubricating oil to the lubrication points of the grouting pump and perform tightening, adjustment and maintenance. With proper maintenance, the catalyst hose will need to be replaced after approximately 1,000 tons of grouting material has been used. Worn piston components and seals will need to be replaced after approximately 1,000,000 tons of grouting material has been used.
>Pneumatic double liquid grouting pump physical picture
> % />
>Pneumatic double liquid grouting pump accessories coal safety certificate
>Pneumatic double liquid grouting pump accessories patent certificate
>Service Concept
Respect customers and understand them
Continue to provide products and services that exceed customer expectations
Be a forever partner of customers
Contact: Zhang Heteng
Phone
3ZBQS12/10 mining pneumatic double liquid grouting pump accessories